Noble LED Bollard

LED Bollard/Pathway

USE OF PRODUCT
The intended use of this product is for pathways, parking lots, plazas, entrance ways, parks, and as landscape accents.

HOUSING
Aluminum housing.

LOUVER
Rugged aluminum external 360° around bollard. 180° louvers are available upon request.

FINISH
Matte-finished, thermoset polyester oven-baked powder-coat finish. Available in standard dark polyester bronze or consult factory for made-to-order architectural finishes.

OPTICS
Available “house side” cut-off shield (see options). Rubber gasket seals the lens to the housing and prohibits entrance of outside contaminants.

LED
High-output LEDs offer a minimum estimated operating life of 50,000 hours in 3000K, 3500K, 4000K, or 5000K (standard) with CRI>83. LEDs placed on high-performance aluminum heat sink for reduced junction temperatures and 
extended life.

DRIVER
Durable and long lasting LED driver operates at 120–277V and boasts a 90% power factor at 50 to 60 Hz with 0–10V dimming constant current. Driver protections includes, output open load, over-current and short-circuit, and over-temperature with auto recovery. -30ºC minimum temperature to 40ºC maximum temperature. Step down transformer may be utilized for 480V or 347V applications.

MOUNTING
Four 3/8" by 12" galvanized anchor bolts with two nuts and washers (included). The anchor base plate is constructed heavy-duty aluminum. Bollard must be mounted on a concrete base (supplied by others).

LISTINGS/COMPLIANCE
CEC compliant emergency drive.
ETL compliant.
UL listed.
Suitable for wet locations.