T376LEDT

Turtle Friendly LED Area Light

Turtle Friendly

Use of Product
These luminaires are recommended for use in areas where artificial lighting is needed adjacent to ecologically sensitive areas, sea turtle nesting beaches, migratory corridors, and Dark Sky Friendly communities.Pole mounted fixtures near a nesting beach are to be located only on the landward side of a structure with maximum mounting height of 12 feet and additional shielding would be required if the fixture is within line of sight of the beach.
 
Housing
Rugged die cast aluminum housing with hinged front frame. 1/2” coin plugs with O-rings for conduit & photocell. Includes Full Baffle Required to Maintain Florida Fish & Wildlife Conservation Commission certification.
 
Finish
Matt-finished, architectural bronze powdercoat over a precise chromate conversion coating. Available in standard dark polyester bronze or consult factory for made to order architectural finishes.
 
Optics
Tempered Clear Flat Glass Lens. Available in Type 5 optical distribution.
 
 LED
Operate between 585 and 595 nm. Aluminum boards.
 
Driver
Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less than 20% THD and PF>0.90. Standard internal surge proection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%
 
Mounting
Arm mount, Easy-hung wall bracket or arm mount adapter available.
 
Warranty
5-Year warranty for -40˚C to +40˚C environment.
 
Listings/compliance
• CSA - Listed for wet location.
• ANSI/UL 1598
• 8750 IP65 sealed LED compartment