T630LED - G2
Small LED Trapezoidal Cut-off Wall Pack
LED Wall Mounts
USE OF PRODUCT
The intended use of this product is for any outdoor commercial or industrial building accent, pedestrian walkways, public access areas, or recreation areas.
Rugged die cast aluminum housing with hinged front frame. 1/2” coin plugs with O-rings for conduit & photocell.
Matt-finished, architectural bronze powdercoat over a precise chromate conversion coating. Available in standard dark polyester bronze or consult factory for made to order architectural finishes.
Specular anodized aluminum reflector with clear tempered glass lens. Lens is sealed by one-piece silicon gasket prohibits entrance of outside contaminants. Available in either Type 3 or Type 5 optical distribution.
High output LEDs offer a minimum estimated operating life of 50,000 hours in 3000K, 3500K, 4000K, or 5000K with CRI>83. LEDs placed on high performance aluminum heatsink for reduced junction temperatures and extended life.
Effective Projected Area (Sq. Ft.): .721 ft^2 (1 fixture),
Durable and long lasting LED driver operates at 120-277V and boasts a 90% power factor at 50 to 60 Hz with 0-10V Dimming Constant Current. Driver protections includes: Output open load, over-current and short-circuit, and over-temperature with auto recovery. -30ºC Min Temp. to 40ºC Max Temp. Step down transformer may be utilized for 480V or 347V applications.
Cast-in template for mounting directly over a 4” recessed outlet box or 1/2” surface conduit.
• CSA - Listed for wet location.
• Dark Sky Compliant
• CEC compliant emergency driver.