LED Flat top cylinder luminaire
USE OF PRODUCT
The intended use of this product is for parking lights, area lights, and pathway lighting.
Weathertight unit continuous heliarc welded at all seams. The square model is die-formed from .063” thick aluminum; the round model is spun from 0.080” thick aluminum.
Offered in three mounting styles: yoke mount (two legs), spider mount (four legs), and fixed arm mount.
Thermoset polyester oven-baked powdercoat, in any standard color. Made to order colors are available to your specification.
• The lens consists of a 1/8” tempered, high impact heat-resistant flat glass. Lenses are installed with Poron gasketting between the doorframe and the fixture housing channel to form a seal against moisture and insects. The square lens frame is one-piece die formed from .063’ thick aluminum; the round lens frame is spun from .080” thick aluminum. Frames are secured by two stainless steel captive screws for easy maintenance. The lens frame of square models opens on two heavy duty take apart hinges; lens frame of round models opens on a one piece stainless steel piano hinge.
High output LEDs offer a minimum estimated operating life of 50,000 hours in 3000K, 3500K, 4000K, or 5000K (standard) with CRI>83. LEDs placed on high performance aluminum heatsink for reduced junction temperatures and extended life.
Durable and long lasting LED driver operates at 120-277V and boasts a 90% power factor at 50 to 60 Hz with 0-10V Dimming Constant Current. Driver protections includes: Output open load, over-current and short-circuit, and over-temperature with auto recovery. Step down transformer may be utilized for 480V or 347V applications.
Aluminum Slip-fitter is available up to 3.0” OD
Effective Projected Area (Sq. Ft.): 1.948 ft^2
•CSA - Suitable for wet locations.
•Dark Sky Compliant