22" Skyline LED Area Light

LED Area

USE OF PRODUCT 
The Skyline LED luminaire delivers exceptional performance in a sleek, low-profile design with various lumen and optical distribution options. The intended use of this product is for building areas, parking lots, auto dealerships, roadways, walkways, pedestrian pathways, and security lighting.
 
CONSTRUCTION
Die-cast aluminum fixture with isolated driver compartment and finned heat sink keep electrical temperatures in suitable ratings for optimal performance.     
 
FINISH
Bronze matte-finished, architectural powder coat over a precise chromate conversion coating. Consult factory for made-to-order architectural finish. 
 
ELECTRICAL 
≥0.9 Power factor
<20% Total harmonic distortion
120V–277V 50/60Hz
-40ºC Minimum temperature
+45ºC Maximum temperature 

LED
Standard LED driver with 0–10V dimming. Shipped with 10KV surge protection. Optional photo control or PIR (motion) sensor available upon request for further energy savings and security measures. Consult factory for PIR setting capabilities.
 
DRIVER
Durable LED driver operates at 120–277V with 0–10V dimming protocol. Power factor: 0.90; 50 to 60 Hz. Driver protections include output open load, over-current and short-circuit, and over-temperature with auto recovery. -30ºC minimum temperature to 40ºC maximum temperature.

OPTICS
Precisely designed optics to maximize distribution, efficiency, and spacing. UV resistance polycarbonate lens is available in Type III (standard), Type IV, or Type V distribution patterns. Offered standard in 4000K CCT in 72+ CRI. Optional 3000K, 3500K, or 5000K CCT are available upon request. 
 
MOUNTING
Round/square pole arm mount with quick-mount design for ease of installation, wall mount, or adjustable slipfitter available upon request. Fixture pole must be mounted on a concrete base (supplied by others).

EPA
Effective projected area (Sq. Ft): 0.988 ftˆ2.

LISTINGS/COMPLIANCE/ WARRANTY
UL/cUL wet location listed
DLC qualified.
5-year limited warranty.