Download PDF File

4" LED Fire Rated Pull Down Square Downlight

Fire Rated LED Downlight

Use of Product
The Fire Rated LED New Construction Downlight Series provides 2 hour fire protection by utilization of non-combustible insulation within the fixture's double wall.  This design prevents flames, toxic gases, and ignitable gases to pass through into the ceiling plenum making a great choice for residential, multifamily, and commercial applications.
- 2 Hour fire rating
- Rated for direct contact with insulation.
- Lumens: 830 Lumens
- Finish: White, Black, Satin Nickel and Bronze
- Wattage: 12 Watts
- Voltage: 120V
- Color Temperature: 2700K, 3000K, 3500k, or 4000K
- R9 Value: 85
- Color Rendering Index: 93 CRI Typical
- LED Life: 50,000 hours
- LED Type: Cree LED for maximum light output
-Versatility: Interchangeable lens available in 19° and 38°; 365° horizontal rotations 65° vertical drop from nadir.
- Warranty: 5 Year Limited Warranty
LED Driver
Durable Triac/ELV, 120V dimmable driver provides high power factor with the optimum thermal management to prevent damage caused by high temperature. Driver protections include: output open load, over-current and short circuit, and over temperature with auto recovery.
Emergency Battery
Optional emergency back-up may be ordered separately. Unit operates for 90 minutes with LED modules up to 20 Watts and is Damp location rated, 120/277AC operational, 800 delivered lumens. Ceiling access required with emergency option.

Available in 8 driver selections. Standard Triac/ELV, 120. (018) 0-10V dimming in 800 lumens, 120-277V. (011) 0-10V dimming in 1100 lumens,
120-277V.  (PEQ0) Lutron Hi-Lume Premier Ecosystem 0.1% w/soft on, fade to black dimming, 120-277V. (LDE1) Lutron Hi-Lume 1% Ecosystem with soft on, fade to black dimming, 120-277V. (LDE5) Lutron Hi-Lume 5% Ecosystem, 120-277V. (LTE) Hi-Lume 1% 2-wire, 120V (EEI) eldoLED Eco 1% Dim (0-10V), 120-277V. (EDIO) eldoLED Solo 0.1% Dim(0-10V), 120-277V. (EDID) eldoLED Solo 0.1% Dim(DALI), 120-277V. Ceiling access required with all driver options, except with standard Triac/ELV protocol.
Module Mechanics
The RFL4ER Series is constructed of the durable heat sink, baffle or reflector, trim ring, diffused lens and Cree LEDs for optimum performance. Interchangeable round or square baffle, reflector, and trim ring are designed for convenient color selection and replacement in the field. Diffused, the lens provides for even light output, glare control, and conceals LEDs from view.
Beam Option
-lens available in 19° and 38° beam angle
-Interchangeable lens and field replaceable
-Comes with clear lens cover
Plaster Frame
Galvanized steel construction. The housing can be removed from plaster frame to provide access to the junction box.
Die formed 22 gauge galvanized steel construction. Housing interior is comprised of flexible non-combustible insulation.
Junction Box
- Listed for through branch circuit wiring.
- Contains one 1-1/8”, one 1/2”, three 7/8” knockouts. and four Romex pryouts with strain relief.
Bar Hanger
- Pre-installed real nail easily installs in regular lumber or engineered lumber.
- Bar hangers are adjustable from 13-5/8” to 25” and can be repositioned to 90° on plaster frame.
- Swivel bar hanger bendable at 90° angle for easy installation.
- cULus Listed for feed through
- Certified under ASTM-E283 for air-tight construction
- CSA Classified for wet location
- LM79 and LM80
- Can be used for the state of California Title 24 compliance
- JA8 certified
- Energy Star