RHL4RICAT-RFL411LXXK-011

4" LED IC Air-Tight 1100 Lm Remodel Housing 0-10V Dimming

4" LED Commercial Downlight

Use of Product
The Versatrim RFL4 Series is the ideal product for energy efficient lighting in existing, remodel, or new construction housings. This product may be used in hospitality, health care, commercial, retail, and residential applications. The Versatrim will reduce energy consumption, emits little heat, and reduces cooling loads for added costs savings. Approximately 75% in energy savings compared to incandescent light source.

Versatrim Features
-Watts: 12.5W
-Lumens: 1100 Lumens
-Voltage: (120V standard); 120-277V (with optional 0-10V dimming driver)
-Color Temperature: 2700K, 3000K, 3500K, or 4000K
-Color Rendering Index: 93+ CRI Typical
-SDCM: 2 Step binning
-R9 Value: 85
-LED Life: 50,000 hours
-LED Type: Cree LED for maximum light output
-Versatility: Interchangeable baffle, reflector, and trim in round and square.
-EM Battery: 90 min, 800 delivered lumens.
-Warranty: 5 Year Limited Warranty
-Wet Location Certified

LED Driver
Durable 120-277V dimmable driver provides high power factor with the optimum thermal management to prevent damage caused by high temperature. Driver protections include: output open load, over-current and short circuit, and over temperature with auto recovery.

Emergency Battery
Optional emergency back-up may be ordered separately. Unit operates for 90 minutes with LED modules up to 20 Watts and is Damp location rated , 120/277AC operational, 800 delivered lumens.

Dimming
Available in 8 driver selections. Standard Triac/ELV, 120. (011) 0-10V dimming in 1100 lumens, 120-277V.  (PEQ0) Lutron Hi-Lume Premier Ecosystem 0.1% w/soft on, fade to black dimming, 120-277V. (LDE1) Lutron Hi-Lume 1% Ecosystem with soft on, fade to black dimming, 120-277V. (LDE5) Lutron Hi-Lume 5% Ecosystem, 120-277V. (LTE) Hi-Lume 1% 2-wire, 120V (EEI) eldoLED Eco 1% Dim (0-10V), 120-277V. (EDIO) eldoLED Solo 0.1% Dim(0-10V), 120-277V. (EDID) eldoLED Solo 0.1% Dim(DALI), 120-277V.

Module Mechanics
The RFL4 Series is constructed of durable heat sink, baffle or reflector, trim ring, diffused lens and Cree LEDs for optimum performance. Interchangeable round or square baffle, reflector, and trim ring are designed for convenient color selection and replacement in the field. Diffused, lens provides for even light output, glare control, and conceals LEDs from view.

Housing Construction
- Minimum Clearance “IC” or insulated ceiling housings are rated for direct contact with insulation. No minimum clearance is required.
- Ceiling Thickness: Up to 1¼”
- Bar Hangers: Bar Hangers are adjustable from 13-5/8”to 25” and can be repositioned to 90°.
- Junction Box: Junction box is listed for through branch circuit wiring and contains seven 7/8 knockouts and four ROMEX pryouts with strain relief.
- Plaster Frame: Galvanized steel construction

Labels/Compliance
-CSA Classified for wet location
-LM79 and LM80
-Can be used for state of California Title 24 compliance