Download PDF File

Small Industrial LED Wall Pack

LED Wall Mounts

The intented use of this product is for any outdoor commercial or industrial building accent, hallways, stairwells, or corridor applications.

• Bronze Polycarbonate Front Housing with Clear Prismatic Lens Area.
• 20mm coin plugs with O-rings for conduit and photocell.

Matte-finished, architectural bronze powdercoat over a precise chromate conversion coating. Available in standard dark polyester bronze or consult factory for made to order architectural finishes.

Specular anodized aluminum reflector with clear ribbed polycarbonate lens area in front housing. Lens is sealed by a one-piece silicon gasket which prohibits entrance outside contaminants.

High output LEDs offer a minimum estimated operating life of 50,000 hours in 3000K, 3500K, 4000K, or 5000K with CRI>83. LEDs placed on high performance aluminum heatsink for reduced junction temperatures and extended life.

Durable and long lasting LED driver operates at 120-277V and boasts a 90% power factor at 50 to 60 Hz with 0-10V Dimming Constant Current. Driver protections includes: Output open load, over-current and short-circuit, and over-temperature with auto recovery. -30ºC Min Temp. 40ºC Max Temp. Step down transformer may be utilized for 480V or 347V applications.

Mounted over a 4” recessed outlet box or use a 1/2” surface conduit.

• CEC compliant emergency driver
• CSA - Suitable for wet locations