T639LED

Download PDF File
Download PDF File
Download PDF File

11" Slim LED Wall Pack

LED Wall Mounts

 

USE OF PRODUCT
The intended use of this product is for any outdoor commercial or industrial building accent, pedestrian walkways, public access areas, or recreation areas.

HOUSING
Rugged die cast aluminum housing with hinged front frame. 1/2” coin plugs with O-rings for conduit & photocell. Integral motions sensor and emergency battery available with back box addition.

FINISH
Matt-finished, architectural bronze powdercoat over a precise chromate conversion coating. Available in standard dark polyester bronze or consult factory for made to order architectural finishes.

LENS
Specular anodized aluminum reflector with a Polycarbonate lens. Lens is sealed by one-piece silicon gasket prohibits entrance of outside contaminants.

LED
High output LEDs offer a minimum estimated operating life of 50,000 hours in 5000K with CRI>84; Efficacy: 116lm/W. LEDs placed on high performance aluminum heatsink for reduced junction temperatures and extended life.

DRIVER
Durable and long lasting LED dimmable driver operates at 120-277V; Power factor: 0.15; 50 to 60 Hz. -30ºC Min Temp. to 40ºC Max Temp.

MOUNTING
Cast-in template for mounting directly over a 4” recessed outlet box or 1/2” surface conduit.

EPA
Effective Projected Area (Sq. Ft.): 0.156 ft^2 (1 fixture)

WEIGHT
10 Lbs

LISTINGS/COMPLIANCE
•CEC Compliant emergency driver
•CSA - Listed for wet location.