Bi - Directional LED Wall Luminaire
LED Wall Mounts
USE OF PRODUCT
The intended use of this product is for wall wash luminaires and/or directional lighting for commercial, retail, or architectural applications.
Rugged one piece extruded aluminum housing with precision die cast ballast housing. Three captive, tamper resistant, stainless steel screws secure the faceplate to the housing.
Weather resistant, matt-finished powdercoat process for advanced protection in severe environments over a precise chromate conversion coating. Available in standard dark polyester bronze finish or consult factory for made to order architectural finishes.
Anodized aluminum reflector with 36° beam angle. Clear tempered glass lens for impact resistance. Fixture available in either up light or down light configuration. Lens is sealed by a one- piece silicon gasket, which prohibits entrance of outside contaminants.
High output LEDs offer a minimum estimated operating life of 50,000 hours in 3000K, 3500K, 4000K, or 5000K (standard) with CRI>83. LEDs placed on high performance al uminum heatsink for reduced junction temperatures and extended life.
Durable and long lasting LED driver operates at 120-277V and boasts a 90% power factor at 50 to 60 Hz with 0-10V Dimming Constant Current. Driver protections includes: Output open load, over-current and short-circuit, and over-temperature with auto recovery. Step down transformer may be utilized for 480V or 347V applications.
Effective Projected Area (Sq. Ft): 0.633 ft^2
Luminaire may be mounted over a 4” recessed outlet box.
• CEC Compliant emergency driver
• Meets Dark Sky Compliant standards when fixture is lit in down configuration only.