T614LED

14" Polycarbonate Square Eyelid LED Luminaire

LED Wall Mounts

USE OF PRODUCT
The intended use of this product is for decorative wall mount, building accents, pedestrian walkways, public access areas, or to accent
landscape areas.

HOUSING
15” diameter rugged die cast surface mount housing with 1/2” coin plugs with O-rings for conduit & photocell. Built-in template for
mounting to electrical box.

FINISH
Matt-finished, architectural bronze powdercoat over a precise chromate conversion coating. Available in standard dark polyester bronze or consult factory for made to order architectural finishes.

OPTICS
Specular anodized aluminum reflector with vandal resistant polycarbonate prismatic lens. Lens is sealed by a one-piece silicon gasket which prohibits entrance of outside contamination.

LED
High output LEDs offer a minimum estimated operating life of 50,000 hours in 3000K, 3500K, 4000K, or 5000K (standard) with CRI>83. LEDs placed on high performance aluminum heat sink for reduced junction temperatures and extended life.

DRIVER
Durable and long lasting LED driver operates at 120-277V and boasts a 90% power factor at 50 to 60 Hz with 0-10V Dimming Constant Current. Driver protections includes: Output open load, over-current and short-circuit, and over-temperature with auto recovery. Step down transformer may be utilized for 480V or 347V applications.

MOUNTING
Cast-in template for mounting directly over a 4” recessed outlet box or use a 1/2” surface conduit.

LISTINGS/COMPLIANCE
• CSA -Suitable for wet locations.