T435LED

Download PDF File
Download PDF File
Accessories

LED Medium Round Back Flood Light

LED Flood/Spot

USE OF PRODUCT
The intended use of this product is for pedestrian walkways, public access areas, flagpoles, recreation areas, landscape areas, or for accent purposes.

HOUSING
Rugged die cast aluminum housing with hinged front frame for easy access to fixture compartment.

FINISH
Matt-finished, architectural bronze powdercoat over a precise chromate conversion coating. Available in standard dark polyester bronze or consult factory for made to order architectural finishes.

OPTICS
Specular anodized aluminum reflector is designed for maximum photometric efficiency and optimum light distribution. Clear tempered glass lens for impact resistance. Lens is sealed by a one- piece silicon gasket which prohibits entrance of outside contamination.

LED
High output LEDs offer a minimum estimated operating life of 50,000 hours in 5000K (standard) with CRI>83. LEDs placed on high performance aluminum heatsink for reduced junction temperatures and extended life.

DRIVER
Durable LED driver operates at 120-277V with 0-10V dimming protocol. Power factor: 0.90; 50 to 60 Hz. Driver protections includes: Output open load, over-current and short-circuit, and over-temperature with auto recovery. -30ºC Min Temp. to 40ºC Max Temp. Step down transformer may be utilized for 480V or 347V applications.

MOUNTING
Knuckle, slipfitter, arm mount, ground stake, post top fitter.

LISTINGS/COMPLIANCE
•CEC Compliant emergency drive
•CSA - Listed for wet locations.