8" x 8" Square LED Luminaire
USE OF PRODUCT
The intended use of this product is for parking areas, entrances, walkways, underpasses, loading docks, or recreation areas.
Rugged die cast aluminum housing. 1/2” Coin plugs in with O-rings for conduit and photocell.
Matte-finished, architectural white powdercoat over a precise chromate conversion coating. Available in standard dark polyester bronze or consult factory for made to order architectural finishes.
White aluminum reflector is designed for maximum photometric efficiency and optimum light distribution. Polycarbonate lens for increased vandal resistance. One-piece silicon gasket which prohibits entrance of outside contaminants.
High output LEDs offer a minimum estimated operating life of 50,000 hours in 3000K, 3500K, 4000K, or 5000K (standard) with CRI>83. LEDs placed on high performance aluminum heatsink for reduced junction temperatures and extended life.
Durable and long lasting LED drivers operate at 120-277V and boasts a 90% power factor at 50 to 60 Hz with 0-10V Dimming Constant Current. Driver protections includes: Output open load, over-current and short-circuit, and over-temperature with auto recovery. Step down transformer may be utilized for 480V or 347V applications.
Mount directly over a 4” recessed outlet box or use a 1/2” surface conduit or quick mount bracket.
Available in 10W, 18W, and 30W.
•CSA - Suitable for wet locations
Wire guard available upon request.