12" x 12" Square LED Canopy Luminaire
USE OF PRODUCT
The intended use of this product is in parking areas, entrances, walkways, underpasses, loading docks, or recreation areas.
Rugged die cast aluminum housing. 1/2” Coin plugs in with O-rings for conduit and photocell.
Matt-finished, architectural white powdercoat over a precise chromate conversion coating. Consult factory for made to order architectural finishes.
Anodized aluminum with white powdercoat steel reflector. Polycarbonate lens for increased vandal resistance. Lens is sealed by a one-piece silicon gasket which prohibits entrance of outside contamination.
High output LEDs offer a minimum estimated operating life of 50,000 hours in 3000K, 3500K, 4000K, or 5000K (standard) with CRI>83. LEDs placed on high performance aluminum heatsink for reduced junction temperatures and extended life.
Durable and long lasting LED driver operates at 120-277V and boasts a 90% power factor at 50 to 60 Hz with 0-10V Dimming Constant Current. Driver protections includes: Output open load, over-current and short-circuit, and over-temperature with auto recovery. Step down transformer may be utilized for 480V or 347V applications.
Mount directly over a 4” recessed outlet box or use a 1/2” surface conduit or quick mount bracket.
•CSA - Suitable for wet locations
Wire guard available upon request.