8" x 8" Square Induction Canopy Luminaire
USE OF PRODUCT
The intented use of this product is for parking areas, entrances, walkways, underpasses, loading docks, or recreation areas.
Rugged die cast aluminum housing. 1/2” Coin plugs in with O-rings for conduit and photocell.
Matte-finished, architectural white powdercoat over a precise chromate conversion coating. Available in standard dark polyester bronze or consult factory for made to order architectural finishes.
White aluminum reflector is designed for maximum photometric efficiency and optimum light distribution. Polycarbonate lens for
increased vandal resistance. One-piece silicon gasket which prohibits entrance of outside contaminants.
ELECTRICAL - DRIVER
• Input Voltage: 120V - 277V
• Input Frequency: 50/60 Hz
• Output Frequency: 250KHz - 365KHz
Available in 40W, or 60W.
Mount directly over a 4” recessed outlet box or use a 1/2” surface conduit or quick mount bracket.
Available in 10W, 18W, and 30W.
• CSA-Suitable for wet locations.
Wire guard available upon request.