T752IND

12" x 12" Square Induction Canopy Luminaire

Induction

USE OF PRODUCT
The intented use of this product is in parking areas, entrances, walkways, underpasses, loading docks, or recreation areas.

HOUSING
Rugged die cast aluminum housing. 1/2” Coin plugs in with O-rings for conduit and photocell.

FINISH
Matt-finished, architectural white powdercoat over a precise chromate conversion coating. Consult factory for made to order architectural finishes.

OPTICS
Anodized aluminum with white powdercoat steel reflector. Polycarbonate lens for increased vandal resistance. Lens is sealed by a one-piece silicon gasket which prohibits entrance of outside contamination.

ELECTRICAL - DRIVER
• Input Voltage: 120V - 277V
• Input Frequency: 50/60 Hz
• Output Frequency: 250KHz - 365KHz

INDUCTION LAMP
Available in 40W, 60W, 80W, and 100W.

MOUNTING
Mount directly over a 4” recessed outlet box or use a 1/2” surface conduit or quick mount bracket.

LISTINGS/COMPLIANCE
• CSA-Suitable for wet locations

ACCESSORIES
Wire guard available upon request.