Avanti LED Bollard
USE OF PRODUCT
The intended use of this product is to accentuate landscape areas, pedestrian pathways, and entranceways. It is an excellent source to guide walkways or driveways.
Rugged heavy-gage cast, spun, and extruded aluminum.
Matt-finished, thermoset polyester oven baked powdercoat finish. Available in standard dark polyester bronze finish for impact, corrosion, and UV resistance. Consult factory for made to order architectural finishes.
• Distribution is 360°, using a special nautically-styled polycarbonate
lens. Also available with an internal dome reflector.
• Rubber gasketting seals the lens to the housing to prevent entrance of outside contaminants.
High output LEDs offer a minimum estimated operating life of 50,000 hours in 3000K, 3500K, 4000K, or 5000K (standard) with CRI>83. LEDs placed on high performance aluminum heatsink for reduced junction temperatures and extended life.
Durable and long lasting LED driver operates at 120-277V and boasts a 90% power factor at 50 to 60 Hz with 0-10V Dimming Constant Current. Driver protections includes: Output open load, over-current and short-circuit, and over-temperature with auto recovery. -30ºC Min Temp. to 40ºC Max Temp. Step down transformer may be utilized for 480V or 347V applications.
• Bollard must be mounted on a concrete base.
(Supplied by others)
• CEC Compliant emergency drive
• CSA - Suitable for wet locations
ANCHOR BASE & BOLT
Three 3/8”x 12” galvanized anchor bolts are supplied, complete with two nuts and washers. The anchor base plate is made of heavy-duty aluminum.