Large LED Wall Pack w/ Wattage and Color Temp. Selectable

LED Wall Mounts

USE OF PRODUCT
The intended use of this product is for decorative wall mount, building accents, pedestrian walkways, public access areas, or to accent walkways & landscape. Wattage and color temperature may be modified in field with a simple dial. 
 
HOUSING
Rugged die cast aluminum housing hinged front frame. 1/2” coin plugs with O-rings for conduit & photocell.

FINISH
Matt-finished, architectural bronze powdercoat over a precise chromate conversion coating. Available in standard dark polyester bronze or consult factory for made to order architectural finishes.

OPTICS
Polycarbonate optical lens with UV stabilizers. Sealed by a one-piece silicon gaskets prohibits entrance of outside contaminants.

LED
High output LEDs offer a minimum estimated operating life of 50,000 hours, Color temperature selectable at  3000K, 4000K and 5000K with CRI>70. Color temperature may be modified in the field. LEDs placed on high performance aluminum heatsink for reduced junction temperatures and extended life.   

DRIVER
Durable LED driver operates at 120-277V with 0-10V dimming protocol. Power factor: 0.90. Fixture available in selectable wattage at 70W and 100W. Wattage may be modified in the field. Driver protections includes: Output open load, over-current and short-circuit, and over-temperature with auto recovery. -40ºC Min Temp. to 40ºC Max Temp.

MOUNTING
Mounted over a 4” recessed outlet box or 1/2” surface conduit.

LISTINGS/COMPLIANCE
• UL - Listed for wet location
• CEC compliant emergency driver